25
Fig. #28
Optional
Screen Door
Frame
Spring
Nut
OPTIONAL SCREEN FRONT ATTACHMENT
SHOWN WITH DOORS REMOVED
SCREEN DOOR INSTALLATION
WARNING:
Non-combustible facing material and extended top
standoffs must be used if the Optional Screen Door is to be installed.
Do not
install the Optional Screen Door onto an Esteem Fireplace
that was framed in without the extended top standoffs and non-
combustible facing material.
If the information in this manual is not followed, a fire may result
causing
PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF
LIFE!
Unpack and inspect the Screen Door. A flathead, Phillips, or a #2
Robertson screwdriver is required to install this kit. The Screen Door
must be installed before the optional top and bottom louvers.
1) Slide the spring nuts (supplied) over the slotted holes in the outer
frame, one in each corner (see Fig. #28).
2) Position the Screen Door in place and fasten to the outer frame
with the #8 x 1/2" screws provided.
3) The Screen Door may be adjusted up and down before tightening
in place.
The use of top and bottom louvers
with the Screen Door is optional.
f i r e - p a r t s . c o m
