background image

QC SERIES MANUAL

file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]

Function Code 13: Set Time
Function Code 14: Set Date
Function Code 15: Initializing Event Recording
Function Code 16: Auto Unlock Schedule (AUS)
Function Code 17: Time Zone (TMZ)
Function Code 18: Holiday Zone (HLD)
Function Code 19: Directory Digit
Function Code 20: AUXIN1
Function Code 21: AUXIN2
Function Code 22: Do Not Disturb

Opening Door Remotely
Opening Door Using Access Code, Temporary Code
and Special Code
Opening Door Using Card, Temporary Card, and
Special Card
Extending Talk Time
Call the System from Remote Location

CHAPTER 6 QWCM

LIMITATIONS OF LIABILITY

This manual is subject to change without notice.

Pach and Company is not liable for any errors that might occur from use of this document, nor is any commitment to
update the information herein implied.

Pach and Company does not assume any liability for any damages, which may arise in installation or use of the Quantum
QC Series Pach and Company does not assume liability for any incompatibility between the Quantum QC Series and users
devices.

Pach & Company reserves the right to make changes without prior notice to any products in order to improve reliability,
function or design.

 

PRODUCTS LIMITED WARRANTY

If your product does not work properly because of a defect in materials or workmanship, Pach and Company (referred to
as the warrantor) will, for the length of the period indicated on the chart below, which starts with the date of original
purchase (Limited Warranty Period), at its option either (a) repair your product with new or refurbished parts or (b)
advance replacement with new or refurbished product. The decision to repair or advance replacement will be made by the
warrantor. Advance replacement will be ship UPS ground under the warranty period with no charge. 

The defective product

must be return to Pach and Company within 15 days after receiving the advanced replacement otherwise you will be billed
the full amount.

Parts:

   Two (2) year, does not cover parts needed to re-install the product by the installer                                   

Labor: 

 Two (2) year, does not cover installation labor

Cards, Fobs and Transmitters warranted for 90 days

LIMITED WARRANTY LIMITS AND EXCLUSIONS

This limited warranty 

ONLY COVERS

 failures due to defects in materials or workmanship, and 

DOES NOT COVER

normal wear and tear or cosmetic damage.

The Limited Warranty 

ALSO DOES NOT COVER

 damages which occurred in shipment, or failures which result from

Содержание QUANTUM QC Series


































Отзывы: