PACH & COMPANY QUANTUM QC Series, Руководство пользователя

Страница: 32 / 33

QC SERIES MANUAL
file:///C|/PACH-CO.COM-2022-B/online_manual/qc_series_manual.htm[4/27/2022 8:58:09 AM]
5.4 Opening Door Using Card, Temporary Card, and Special Card
The Quantum QC Series has built-in card reader. The door can be access using UFOB, UCLAM or UISO.
Card Standard Operation is used to open the door and door will be closed automatically, see
function code 10
Temporary Card is used for limited of times, maximum 10 times then the card will be expired, see function code 35
Special Card is used to unlock hold door and then use same card to lock the door, see function code 36
Pach and Company UFOB, UCLAM and UISO must be used to have access to the card reader. Other
manufacturers card will not work.
Swipe the card or keyfob as shown below. The card reader antenna is mounted behind the black square window.
5.5 Extending Talk Time
The talk time timer is set on function code 27 . The warning beep will be heard one minute before the talk time is expired. It
can be extended more another full cycle by pressing #
5.6 Call the System from Remote Location
1. The system must be install in Intercom and Call Forwarding Mode Wiring Diagram or Call Forwarding Mode
wiring Diagram
2. Function code 38 must be set at least for 1 ring
3. Function code 39 must be set to 1
4. You must have the system phone number
5. Call the system phone number if the system answered, short beep will be heard.
6. Press # then 4-digit Master code (default is 0000), short beep will be heard if master code is accepted
7. Press * to establish two ways communication
8. Press 9 to release relay 1 (door 1) or 8 to release relay 2 (door 2).