PaceSaver
®
Getting to know your new LiNX remote module / Joystick
5
2.1.7 THE HORN
The Horn button is located above the Power button. Press the Horn button
to sound the horn. The horn will sound for as long as the Horn button is
pressed.
2.1.8 USING THE LOCK FUNCTION
The lock function is used, primarily, to restrict who can use the system but
also can help prevent unintentional use of the controls when the system is
not required for any length of time.
When a system is locked, the system is powered down and the user con-
trols are not responsive. If the power button is pressed when the system is
locked, the locked status is displayed to the user by the battery gauge.
To unlock the system, an unlock sequence must be performed by the user
within a specific time frame. If the sequence is not performed correctly,
within the time frame, the system will remain locked and the system will
power down again.
To power down and
lock
the system, press and hold the power button for 4
seconds. When entering the locked state, the battery gauge will indicate the
transition by flashing LEDs (1, 3 and 5) a total of 3 times.
System Locking / Unlocking
2.1.6 ADJUSTING THE DRIVING SPEED
The speed dial allows the user to limit the minimum / maximum
speed of the wheelchair (that is, the speed when the joystick is fully
deflected) to suit their preference and environment.
The dial offers 10 discrete steps between the lowest speed (dial set
to the left) and the highest speed (dial set to the right).
As a visual reminder, a speed symbol (shown left) is positioned by
the speed dial to indicate the low and high positions of the speed dial.
The speed symbol is above the speed dial.
Low
High
Low
High
