PaceSaver
®
Getting to know your new LiNX remote module / Joystick
6
2.1.8 USING THE LOCK FUNCTION CONTINUED
To power up and
unlock
the system, press the power button
once, and then, press the horn button twice — the horn
button must be pressed twice within 10 seconds of pressing
the power button.
If the user implements the unlock sequence incorrectly, or
the power button is pressed again before the unlock
sequence is complete, the system will return to the locked
state.
During an unlock attempt, the battery gauge will indicate the
system is in a locked state by flashing LEDs 1, 3, and 5 (far
left, middle, and far right) until either the system is powered
off, unlocked, or the Sequence Timeout is reached.
System Locking / Unlocking
2.1.9 CHANGING DRIVE FUNCTION
The wheelchair’s drive function can be selected with the drive function select but-
ton, which is located below the power button on the left-hand side of the remote
module.
Press the top of the button to select the next drive function. Press the bottom of
the button to select the previous drive function.
The drive function selected is indicated on the drive function indicator, which is
located to the right-hand side of the drive select button. The indicator has three
LEDs:
1. when drive function 1 is selected, the bottom indicator will be lit;
2. when drive function 2 is selected, the bottom and middle indicators
will be lit;
3. when drive function 3 is selected, all indicators will be lit;
4. when drive function 4 or greater is selected, the top and bottom
indicators will be lit;
Not all wheelchairs will have multiple Drive
Functions. Drive Function’s are only used
with Rem 210 Joystick with multiple acces-
sories function.
