8. Place handpiece(s) into the Tip & Tool
Stand(s).
9. Using Figure 3 as a guide, connect the
handpiece(s) to the Power Source in the
following manner:
a) With the Connector Key end facing the
power source, turn the Locking Ring fully
counterclockwise.
b) Align the Connector Key with the
Receptacle Keyway.
c) Insert the connector into the Power
Receptacle.
d) Turn the Locking Ring fully clockwise to lock
in place.
10. To avoid confusion among handpieces on MBT
201 systems, PACE recommends the use of
colored markers (P/N 6993-0136 Cable Marker
Kit) to identify the particular handpiece power
cable and/or air hose. Attach any two like
colored markers, one to each end of the
handpiece power cable or air hose. Select and
use a different color marker for each handpiece.
11. If you have purchased the optional foot pedal,
insert the foot pedal connector plug into the
Foot Pedal Receptacle on the rear panel of the
power source. (See figure 4)
12. Plug the prong end of the Power Cord into a
convenient three wire grounded outlet.
13. Place the
Power Switch in the “On” or “1”
position. The system is now ready for
operation.
Figure 3. Handpiece Connection
Figure 4. Foot Pedal Connection
Set-up
17
Содержание MBT 201
Страница 1: ...MBT 201 SYSTEMS MAINTENANCE MANUAL OPERATION ...
Страница 2: ...MANUAL NO 5050 0381 REV E i ...