13
OPERATING YOUR SET-TOP
Turning your set-top on and off
After you have connected your set-top to the AC wall outlet (and switched this outlet ON, if it has
a switch), the light around the
power
button on your set-top’s front panel should be red.
Wait for a few seconds, then press the button labeled
power
on the front panel of your set-top to
turn it on. The light around the
power
button goes from red to green, to show that your set-top is
on.
If the light around the
power
button is neither red nor green, there is a problem.
To turn your set-top on or off at any time, press the
power
button on its front panel or the
CBL
button on your remote control.
NOTES
It is important that, unless there is a lightning storm or you will be away from your home for a long time,
you do not unplug your set-top at the wall AC outlet (or do not switch it off there, if the outlet has a
switch). Your set-top can not be updated with new features, through the cable, if it is disconnected from
the AC power supply.
You can use the General Settings screen to set the POWER OUTLET (AC Outlet) on your set-top to be
“Always on” or “On with cable box (Settop)”. With this second setting, a TV attached to POWER OUTLET
will turn off when you turn off your set-top and will turn on when you turn on your set-top.
power
To turn on your
set-top, press
the power
button.
The light around
the button changes
from red to green.
