9
REAR PANEL (cont.)
POWER OUTLET
Connect the TV’s power cord here to provide AC power to your TV.
POWER INPUT
Connect your set-top’s power cord here.
CABLE IN
Connect the cable service here. Optional RF-bypass module also connects here.
BYPASS
Connect an optional RF-bypass module here, to receive power from set-top.
AUDIO IN
Connect to the stereo audio outputs on your DVD player (or similar).
AUDIO OUT TV and
AUDIO OUT VCR
Connect to the stereo audio inputs on your stereo TV, stereo VCR or optional stereo
amplifier (the output is the same from both pairs of jacks).
HDMI (high-definition
multimedia interface)
If your HDTV has an HDMI, connect it here for
digital
audio/video connection
(instead of to AUDIO and COMPONENT VIDEO connectors).
DIGITAL AUDIO OUT
Connect to the
electrical
digital audio input on optional digital audio equipment,
such as an audio decoder or home theater receiver.
DIGITAL AUDIO IN
Connect to any digital audio output that loops through your set-top.
VIDEO IN
Connect to the video baseband output on your DVD player (or similar).
VIDEO OUT
Connect to the video baseband input on, typically, your VCR.
OPTICAL AUDIO OUT
Connect to the optical digital audio input on optional digital audio equipment.
OPTICAL AUDIO IN
Connect to any digital audio output that loops through your set-top.
S-VIDEO OUT
Connect to the S-video baseband input (if present) on, typically, your VCR.
COMPONENT VIDEO OUT
If your HDTV does
not
have an HDMI (see above), connect it here.
COMPONENT VIDEO IN
Connect equipment such as a DVD player, if it has component video jacks.
IR TRANSMIT
Connect to an optional VCR controller (IR transmitter).
IR RECEIVE
Connect to an optional “remote eye” (IR receiver).
1394 (not fitted on all units)
Connect to up to two 1394-compatible devices. (E.g. external hard disks or 1394 TV).
WARNINGS
Do not connect your set-top (or
any other equipment such as a TV
or VCR) to the AC power supply
until you have properly connected
all the other cables.
Disconnect your set-top from the
AC power supply before you
disconnect any other equipment
from its rear panel.
The power outlet is designed only for
connection to the AC power cord for
a TV. The maximum power it can
supply is 500 watts. Do not connect
any equipment that uses more than
500 watts, or any non-TV equipment
such as a toaster or hair dryer.
The cable input is designed for
connection to a cable network only.
You must not connect any other
equipment, such as a VCR, to this
input.
Any cable connected to DIGITAL
AUDIO jacks must be 75 ohm
coaxial, not regular audio cable.
