17
SOLVING PROBLEMS
If the installed system does not seem to be working properly,
firstly make sure that all the cables are securely connected
,
then carry out the following checks, in the order shown.
Check
Suggested solution
Further checks, if there is still a problem
Is anything lighted
on your home
terminal’s front panel?
Power may not be reaching your home terminal.
Make sure that the power cord is properly
plugged in. If there is a switch by the wall AC
power outlet, switch it to ON.
Check that the wall AC power outlet is working
(for example by plugging in a lamp).
Does the remote
control operate your
home terminal?
Your home terminal may not be turned on.
Check if the word POWER is lighted on the
front panel. If it is not, press the POWER button
on the front panel.
Check that nothing is blocking the path from
your remote control and the front panel.
Check that your remote control is currently set
to operate your home terminal as follows:
Press the DEVICE button. If the CBL button
lights up, that’s fine. If the CBL button does not
light up, press the CBL button.
If your remote control will still not operate
your home terminal, replace the batteries in
your remote control.
If there is still a problem, try to operate your
home terminal by using its front-panel buttons.
If this works, then your remote control may be
faulty.
Please see the next page
NO
NO
YES
YES
