14
To turn your home terminal on or off at any time, press the POWER button on its front panel
or the CBL button on your remote control. When the home terminal is on, the word POWER
is lighted on its front panel.
OPERATING YOUR HOME TERMINAL
Using your remote control and the on-screen information
It is your cable TV service provider that determines the digital channels, services and screen
information that you see on your TV.
Consult the information supplied by your cable operator for details on how to make the most
of the digital cable services. Also read the operating instructions that are supplied with your
remote control.
Using the front-panel buttons
You can use the buttons on the front panel to operate your home terminal, if, for example,
there is a problem with your remote control. See the diagram on page 16.
Lightning storms
Occasionally, a lightning storm may affect your home terminal. It may appear that it has
stopped working, but you can easily restore its operation as follows.
Unplug your home terminal’s power cord at the wall AC outlet. Then plug this power cord in
again at the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).
NOTE
It is important that, unless there is a lightning storm or you will be away from your home for a long
time, you do not unplug your home terminal at the wall AC outlet (or do not switch it off there, if the
outlet has a switch). Your home terminal cannot be updated if it is disconnected from the AC power
supply.
