Pace Technologies NANO 2000T Скачать руководство пользователя

Страница: 10 / 52

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲

NSTRUCTION

ANUAL

3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com

Please read this instruction manual carefully and follow all installation, operating and safety guidelines.

NANO 2000T Polisher

3.0 Safety Guidelines

3.1 Warning Sign

This sign points to special safety features on the machine.

Always follow proper operational guidelines and avoid contact with lubricants and abrasives.
Seek appropriate medical care for cutting injuries.

3.3 Emergency Statement

Operate unit as specified in this manual.

Disconnect power before opening unit.

Do not leave any specimen or other parts on the working wheel.

Ensure that the air slots on polishing base are not obstructed.

When unit is not in use turn off water.

Securely hold the sample, preferably with two hands.

3.2 Safety Precautions

Careful attention to this instruction manual and the recommended safety guidelines is
essential for the safe operation of the

NANO 2000T

Proper operator training is required for operation of the

NANO 2000T

. Any unauthorized

mechanical and electrical change, as well as improper operation, voids all warranty
claims. All service issues need to be reported to the manufacturer / supplier.

Содержание NANO 2000T





















































Результаты поиска

Содержание NANO 2000T

Отзывы:

Похожие инструкции для NANO 2000T

Бренды по названию

Популярные бренды

Pace Technologies NANO 2000T, Инструкция по эксплуатации

Результаты поиска

Содержание NANO 2000T

Отзывы:

Похожие инструкции для NANO 2000T

Бренды по названию

Популярные бренды