Pace Technologies MEGA-T300A, Инструкция по эксплуатации

Страница: 30 / 61

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
MEGA - T300A
Abrasive Cutter
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
7.0 Metallographic Cutting Basics
25
Philosophy:
1. Cutting is the most important metallographic sample preparation step
2. Minimize damage during sectioning
3. Less sectioning damage = reduced number of grinding and polishing steps
Note: In some cases cutting damage cannot be removed by subsequent polishing operations
(especially for brittle samples)
Time Well Spent:
1. Spend more time on sectioning in order to decrease overall sample preparation time
2. Protect integrity of the specimen with proper sectioning
Wheel feed
- High speed (3500 rpm)
- High load (15 amps)
Table feed
- Low speed (1500 rpm)
- Low load (2 - 5 amps)
Finer finish with
minimal cutting burr
Coarse finish with
large cutting burr