Pace Technologies MEGA-T250S, Инструкция по эксплуатации

Страница: 27 / 30

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA - T250S
Abrasive Cutter
22
•
Wheel Speed
•
Slower speed for softer metals (1500 - 2000 rpm
•
Medium speed for most metals (2500 - 3000 rpm)
•
Higher speed for harder samples (3500 rpm)
•
Cutting Force
•
Controlled by limiting current to the motor
•
2 - 15 amps
•
Softer metals lower load (2 - 5 amps)
•
Most metals medium load (6 - 10 amps)
•
Harder samples higher loads (11 - 15 amps)
Machine Parameters:
Material Abrasive / Bond Blade Cutting
Speed
Cutting
Force
Soft non - ferrous metals
(aluminum, brass, zinc, etc.)
Alumina / resin MAX - E 1500 rpm 2 - 5 amps
Hard non - ferrous metals
(titanium, zirconium, etc.)
SiC / rubber MAX - C 2500 rpm 5 - 10 amps
Soft steels Alumina / resin MAX - E 1500 rpm 5 - 10 amps
Hard and case hardened steels Alumina / resin MAX - VHS 2500 rpm 10 - 15 amps
General purpose steel and fer-
rous metals
Alumina / resin MAX - D 2500 rpm 10 - 15 amps
Universal thin blade Alumina / rubber MAX - A 2500 rpm 10 - 15 amps
Industrial longer life blades Alumina / resin MAX - I 3500 rpm 10 - 15 amps
Ceramics and glass Diamond / metal DMAX 3500 rpm 5 - 10 amps
Recommended Cutting Procedures: