Pace Technologies MEGA-T250S, Инструкция по эксплуатации

Страница: 16 / 30

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
MEGA - T250S
Abrasive Cutter
3.4 Safety Tests
!
Examine and verify that the MEGA - T250S safety
devices and operating performance are in good working
condition prior to use. The following safety checks are
considered important:
Emergency stop switch
Magnetic Safety switch
11
Test: Activate main switch and close hood;
depress emergency stop switch.
Proper
Response: Machine powers down and motor
stops in 2 - 8 seconds
Malfunction: Machine does not lose power.
Corrective
measure:
If system does not power down,
disconnect power supply cord and call
service technician.
Magnetic safety lock out switch
Test: Activate main switch and close hood;
turn cut - off wheel ON then OFF;
Try to open the hood.
Proper
Response:
Hood does not open for approximately 3
- 5 seconds.
Malfunction: Hood opens immediately.
Corrective
measure:
If cut - off wheel does not power down,
disconnect power supply cord and call
service technician.
Emergency stop switch