Danger:
Risk of electrocution. Make sure, it is safe to work on the electrical installation. Energized
electrical systems are hazardous and can cause electrical shock. Electrical shock can
cause (serious) injury to persons.
5. Electrical installation
The AC electrical installation is executed either by a dedicated party of Heliox, or it is the scope of supply
of the site owner. For details, refer to contract as signed and agreed upon.
It is the sole responsibility of the site owner:
•
to install and connect the AC power supply between the AC power supply grid and the EVSE;
•
to install, when stipulated by local rules, to install and connect an earth electrode next to the charger
cabinet;
•
to make sure, the AC power supply is compliant with the (inter) national Directives, Standards, Rules
and Regulations.
Failing to adhere to the local and (inter)national Directives, Standards, Rules and Regulations, guidelines
and technical details herein can result in unforeseen problems and delays of any kind.
The AC power supply is connected to the phase widgets extensions of the main circuit breaker in
the EVSE. The cables must be terminated and connected in accordance with the instructions as
given by the manufacturer and (inter) national Directives, Standards, Rules and Regulations.
After the cable lugs are installed, torque tightened, apply a torque mark for future reference. The
torque values are listed in the section: Technical specifications.
It is mandatory to make sure, the feed through of the incoming cables are closed to prevent
rodents to enter the cabinet.
Electrical power connection
5.1
Note:
The details of the electrical installation mentioned below are for each of the base
product cabinet.
16
