Note:
Depending on the number of external DC outlets, several sets of output conduits
may reside in the up to 3 output areas.
Note:
The information below are for each of the base product cabinet.
Note:
The cable ducts need to be mounted just a bit above the ground (20 – 50 mm), to
prevent water entering the duct.
The foundation
3.1
800 mm
700 mm
8
0
0
m
m
6
0
0
m
m
1
0
0
m
m
1
0
0
m
m
50 mm
50 mm
A
A
A
A
Front
The EVSE is placed on the foundation.
The foundation shall be as flat as
possible with a maximum slant of 2 mm
across the bottom of the EVSE
equipment. Please see the specification
section of the technical handbook for
details on product weight. Please consult
local code for appropriate foundation
design to comprehend regional needs.
A: M12 anchor bolts are required to
mount EVSE equipment to the
foundation surface. Consult with site
engineering for requirements on bolt
depth, epoxy, and any special
requirements resulting from the
foundation medium.
Input conduits:
•
AC inputs
Output conduits:
•
DC output
•
AC output wiring
•
Signal interface wiring
11
