Single Channel Wireless Air Spring Controls
L6597
12
DISCLAIMER
Driving while distracted can result in loss of vehicle control that may lead to an accident, severe personal injury, or death.
The driver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other
equipment, or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or
which are not permissible by law should never be used during operation of the vehicle.
Thank you again, and congratulations on the installation of your Air Suspension kit.
AFTER COMPLETING THE INSTALLATION
▪
The air spring must have clearance between itself and the surrounding components to prevent any contact when spring is
infl ated or compressed. Trimming off excess bolt length may also be required to ensure no contact with the spring or other
suspension components can be made once installed.
▪
If removed, re-install the wheels and torque fasteners to the manufacturer’s specifi cations. Re-torque all fasteners after the
fi rst 500 miles of driving.
OPERATING YOUR VEHICLE WITH AIR SUSPENSION
Air springs have minimum and maximum recommended pressure requirements:
PART #
SPRING STYLE
SPRING TYPE
MIN PSI
MAX PSI
HP10189
In-Coil
STANDARD DUTY
5
PSI
70
PSI
HP10560
STANDARD DUTY
HP10001
Sleeve Style
STANDARD DUTY
10
PSI
100
PSI
HP10173
STANDARD DUTY
HP10199
STANDARD DUTY
HP10083
Single Convoluted
HEAVY DUTY
5
PSI
100
PSI
HP10083J
HEAVY DUTY
with JOUNCE BUMPER
0
PSI
*
/
5
PSI
100
PSI
HP10000
Double Convoluted
HEAVY DUTY
5
PSI
100
PSI
HP10000J
HEAVY DUTY
with JOUNCE BUMPER
0
PSI
*
/
5
PSI
100
PSI
HP10068
Large Double Convoluted HEAVY DUTY
5
PSI
100
PSI
HP10438
Double Convoluted
EXTREME DUTY
5
PSI
100
PSI
HP10438J
EXTREME DUTY
with JOUNCE BUMPER
0
PSI
*
/
5
PSI
100
PSI
*
Springs with a jounce bumper can be run at zero PSI when vehicle is unloaded only
For safe and proper operation, never operate the vehicle over the maximum listed PSI in the air springs. Staying under the
pressure limit will ensure maximum air spring life.
Failure in doing so may result in damage to your vehicle and/or a void warranty.
It is recommended to check the air pressure in your air springs daily for fi rst couple of days to ensure a leak has not developed.
Air springs are designed to maintain the vehicle’s stock ride height with a load. Do not use the air springs as a means to lift vehicle
with no load. This will result in a harsh ride.
SERVICING YOUR VEHICLE WITH AIR SUSPENSION
When lifting the vehicle with a fl oor jack or hoist on the frame, never allow the air spring to limit the travel of the axle. Try to always
jack the vehicle on the axle. Suspending the axle with the air spring limiting the axle travel will damage the air spring and void the
air spring warranty.
WARRANTY
See additional warranty included with this kit for details.