31
Removing the Controller
Loosen the screws
(1)
under the ejection levers
(2)
.
Push ejection levers downwards and the controller will ease out from chassis.
Installing the Controller
Insert the controller slowly into the module slot. When you feel the contact resistance, use
slightly more force and then push both of the ejection levers upwards (indicated by the
blue
arrows
) to secure the controller into chassis.
Secure the controller by fastening the two retention screws
(1)
under the ejection levers
(2)
.
System Connection
This chapter outlines the general configuration rules you should follow when cabling a
storage system and introduces basic information about topologies. You can use these
topologies or refer to them as a guide for developing your own unique topologies. A
complete description of the power-on and power-off procedures is also given in this chapter.
General Considerations on Making Connections
When selecting the number of hard drives to be included in a logical drive, the host channel
bandwidth and the mechanical performance of individual disk drives should be considered.
