9
FAN MODE
When using the unit in this mode, the exhaust hose does not need to be attached. To properly set this
mode:
• Press the MODE button until the FAN symbol appears.
• Select the desired fan speed by pressing the FAN button. Three speeds are available:
Low speed:
for silent operation
Medium speed:
reduces noise levels but still maintains a good level of comfort
Maximum speed:
to achieve the target tempe rature as rapidly as possible
NOTE:
In this mode AUTO speed cannot be selected.
SMART MODE
This unit automatically chooses whether to operate in COOL or FAN mode. To properly set this
mode:
• Press the MODE button until the SMART symbol appears.
SLEEP FUNCTION
This mode can only be set with the remote control. Please refer to remote control instructions on the
following pages.
ERROR CODES
If the Unit
Displays This
What Should I Do?
Low Temperature
(frost prevention) - The unit is
fitted with a frost protection device to avoid excessive
formation of ice. The unit starts up again automatically
when defrosting process is complete.
Probe Failure
(sensor damaged) - If this is displayed,
contact Consumer Services at 844-472-2473.
Full Tank
(safety tank full) - Empty the internal safety
tank following the instructions in the “End of Season
Operations” paragraph on page 16.
