Receiving FM station
Switching to FM mode
The current operating mode of your radio (FM, DAB+ or Menu) is shown in the upper right corner of
the display. If your device is not in FM mode, press the MODE button on the panel.
To start the automatic station scan, press the SCAN button on the panel. The radio will find the next
available station for you.
Manual scan: Briefly press the right dial knob. Then rotate it to tune in the desired frequency
manually.
Advanced operation
The following functions are identical for the DAB+ and the FM operating modes.
Storing a station as favourite
If you have tuned in a station that you like and you want to recall it later on without having to search it
manually, you can save it as a favourite.
Press and hold one of the five preset buttons for three seconds. To tune in this station at a later time,
just briefly press the same preset button. You can store up to 5 DAB+ and 5 FM stations.
Adjusting the volume
To adjust the playback volume, rotate the left dial knob anticlockwise (lower volume) or clockwise
(higher volume).
Showing additional information
Press the INFO button to display information about the tuned in station. The information available
may vary from station to station.
Settings
Press the MENU button to show the radio main menu.
Here you can find the following submenus:
DAB+ menu
Senderliste: Opens the station list. If a question mark is shown before the station, it cannot be received
at this time.
Suchlauf
Performs an automatic station search along the entire frequency range and adds the found stations to
the station list.
Manueller Suchlauf
Allows you to tune in the frequency manually. Currently the FM menu does not contain any specific
submenus and therefore directly jumps to the reception of the set FM frequency.