USB – only for firmware updates.
LINE-OUT – to connect the device to a HiFi equipment.
POWER INPUT – to connect the radio to the supplied power adapter.
Connecting
Connecting the radio is very simple:
Connect the supplied power adapter to the device power input socket.
Connect the supplied cables to your cable network.
For terrestrial radio reception, swivel the telescopic antenna upwards and unfold it completely.
Next connect the power adapter to a wall outlet. The device is now in standby mode.
Press the left dial knob on the device front panel. The device will start a first station scan in
DAB+ mode. This station scan can take up to 30 seconds. The automatic station scan is only
performed once upon first-time setup.
Use
Receiving DAB+ / DAB stations
Switching to DAB+ mode
The current operating mode of your radio (FM or DAB+) is shown in the upper right corner of the
display. If your device is not in DAB+ mode, press the MODE button on the panel and select DAB+.
Use the right dial knob to confirm your selection.
Scanning for stations
To start the automatic station scan, press the Menu button on the panel and use the Select button to
choose Full Scan. The radio starts scanning the entire frequency range. Use the antenna switch on the
back panel to select whether you want to scan for terrestrial (aerial) or cable stations.
Opening the station list
Rotate the right dial knob. This opens the station list. While you rotate it, the list of available stations
is shown. You can select a station by pressing the dial knob.
Purging the station list
If your DAB+/DAB station list contains any stations marked with a question mark, the reception
conditions have changed and the marked stations cannot be received at this time. To remove one or
more of these stations from the list, use the menu function: PRUNE