6
MAN 9018936 EN V2
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70 21 26 26
DK-6600 Vejen
e-mail: [email protected]
G
Fit the tilt wheel with 2 bolts. Make sure
you push down the locking pin and then
place the wheel in the notch.
H
Finally, insert the engine, making sure
that the flat piece on the drum shaft
matches the flat side on the engine.
When these match properly, push the
engine in completely. The shaft and the
holder must be positioned right by the
hole.