16
MAN 9063783 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
WARNING
Always use the harness.
Fit and adjust the harness so that the brushcutter is balanced with the
blade a few centimetres above the ground. The trimmer head must be
able to move in all directions. Always fit the brushcutter on your right-hand side.
WARNING
Never use bent or damaged cutting blades.
Before clearing, check the cutting blade for defects. If the cutting blade
is damaged, it MUST be replaced. It may be dangerous to use a
defective cutting blade. Always keep the cutting blade away from stone, wire, etc.
that could damage the blade.
Clearing method
a)
Use the front left side to cut with.
b)
Move the blade from right to left and tip slightly to the left.
c)
When clearing a large area, start from the right to avoid hitting the cut grass.
d)
The blade can become stuck in vegetation if the engine speed is too high or if the blade
cuts too deeply into the vegetation. Adjust the engine speed and cutting depth to suit
the conditions.
WARNING
If the grass or other material becomes trapped by the blade or if the machine
begins to vibrate or shake, switch off the engine immediately and inspect the
machine. Replace the blade if it is damaged.
Switch off the engine and ensure the blade has come to a complete standstill
before checking for and removing any trapped material.