6
MAN 9063783 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tel.: +45 70212626
6600 Vejen, Denmark
E-mail: [email protected]
Description
1.
Handle. Double adjustable handle ensures good level of comfort.
2.
Support loop. For attaching harness.
3.
Start switch. A "push switch" mounted above the throttle. Move the switch to the start position
and back to stop.
4.
Throttle cable.
5.
Throttle. Spring-loaded throttle ensures revs drop when the handle is released. The working
position is full throttle. Never hold the throttle completely in when starting the brushcutter.
6.
Locking pawl. Before starting, push the pawl in and the engine is ready to start. The pawl is
released as soon as the throttle button is actuated.
7.
Axle housing. With continuous axle.
8.
Guard – must be fitted when the brushcutter is in use.
9.
Trimmer head with nylon cord used for "light" tasks of clearing grass, weeds, etc. The nylon
cord is cut in lengths of 40 cm.
10.
Angular gear. The blade or trimmer head is mounted on here.
11.
Exhaust. Exercise caution. The exhaust becomes hot when in use.
12.
Starter handle. Pull the starter cord until the engine starts, then carefully allow the handle to
move back. Never release the handle as this may damage the starter.
13.
Petrol tank. Use petrol mixed with 2% two-stroke oil. The petrol filter is located in the tank and
can be cleaned through the filler hole
.
14.
Finger pump (primer bulb). Press the finger pump 3 to 7 times before starting. This removes
any air and old petrol from the carburettor.
15.
Choke. The choke control is located on top of the filter housing.
16.
Air filter housing. Contains the replaceable air filter insert.
17.
Protective pad.
9