P.L.LIGHT SYSTEMS P.L.LIGHT IQ, Руководство пользователя

Страница: 19 / 22

Appendix 1 - Home Screen Messages
Message Condition
Temperature probe disconnected If temperature probe is disconnected
Zone is not programmed If zone is unprogrammed, and mode is set to auto
Temperature control disabled If temperature control is set to disabled
Dim until temperature below: NNN If zone is in High_Temp_* state
Dim if temperature reaches: NNN If zone is in Normal_Operation state
Shutdown until temp below: NNN If zone is in Critical_Temp_Wait state
Zone recovering from high temp If zone is in Recovery_* state
First line (corresponds to the low-level zone device):
Message Condition
Zone mode set to always on Mode is set to ON (overide ON) ignore programming
Zone mode set to always off Mode is set to OFF (overide OFF) ignore programming
Zone in day-time operation Time is after sunrise (end) and before sunset (start)
Zone in night-time operation Time is after sunset (end) and before sunrise (start)
Zone in sunrise mode Time is during sunrise (start and end)
Zone in sunset mode Time is during sunset (start and end)
Second line (corresponds with the current zone status):
Note: messages are listed in order of display priority (higher up the list = higher priority)
Note: messages are listed in order of display priority (higher up the list = higher priority)