P.L.LIGHT SYSTEMS NXT-LP 1000W, Инструкция по эксплуатации

Страница: 6 / 16

4. Safety Recommendations and Warnings
Warning!
Carefully read the warnings below before using or working with the
product!
• Always adhere to the local and national building and electrical codes when
installing or using the fixture.
• This product may cause interference to radio equipment and should not be
installed near maritime safety communications equipment or other critical navi-
gation or communication equipment operating between 0.45 - 30 MHz.
• Do not use the fixture when either its lamp or its power cord are damaged.
Replace the power cord only with original certified cords. Replace the lamp
only with lamps specified by P.L. Light Systems.
• The use of other lamps may damage the product and lamp and will void the
warranty.
• Modifications to the cords can lead to unwanted electromagnetic effects,
which makes the product not comply with legal requirements.
• Do not expose the fixture to:
-condensing humidity, heavy mist, fog or direct spray;
-(ambient) temperatures outside the specified range;
-dust and contamination;
-direct sunlight during use or HID light that could heat up the ballast.
• Always disconnect the fixture from main power source before performing any
maintenance.
• Always allow for a cool down period of at least 30 minutes before touching
the lamp or reflector. Touching the lamp or the reflector when the lamp is lit or
immediately afterwards will result in severe burns!
• Never touch the lamp with bare hands as this will cause damage to the lamp.
We recommend always wearing cotton gloves when handling the lamp(s).
• Do not use the fixture near flammable, explosive or reactive substances. The
lamp and the reflector of the fixture reach temperatures of >85 °Celsius.
• Do not use sulfur vaporizers or water misters. Sulfur and calcium deposits on
your reflector will decrease its efficiency.
• The installation and use of the fixture is the responsibility of the end user.
Incorrect use or installation can lead to failure and damage to the fixture. Dam
-
age to the fixture and electronic circuitry as a result of incorrect installation
and use revokes the warranty.