P.L.LIGHT SYSTEMS NXT-LP 1000W, Инструкция по эксплуатации

Страница: 11 / 16

Page 11
Note:
Adjustment occurs gradually (60 seconds per step) to increase the
lifespan of the lamp.
• Turn the output control knob to adjust the output of the lamp:
- 600W DE: 300/400/500/600/660 Watt
- 1000W DE: 600/660/750/825/1000/1150 Watt
9.1. Adjusting the Output of the Lamp Manually
10. Inspection, Maintenance and Repair
Warning! Disconnect the product from main power source before performing
any maintenance or repairs.
Warning! Do not open or disassemble the fixture, it contains no serviceable
parts inside. Opening the fixture can be dangerous and will void the warranty.
Warning! Always allow for a cool down period of at least 20 minutes before
touching the lamp or reflector.
Caution! Do not clean the fixture with detergents, abrasives or other aggres -
sive substances.
Caution! Wait 20 minutes before activating the fixture after maintenance
work has been conducted.
• Regularly check the fixture for dust or dirt build up. Clean if necessary.
Contamination may cause overheating and decreased performance.
-- Clean the reflector as directed in 10.3.
-- Clean the outside of the fixture using a dry or damp cloth as necessary.
• Check the lamp monthly for discolorations or black markings. Always replace
a damaged lamp.
Note: Before initial use, the lamp could have black markings. This will disappear
when the lamp runs on full power. If not, replace the lamp.
• Regularly check the power cord of the product to ensure it is undamaged.