P.L.LIGHT SYSTEMS NXT-LP 1000W, Инструкция по эксплуатации

Страница: 13 / 16

Page 13
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Peter Stanley
DATE
09/22/16
Solid Edge
TITLE
NXT_LP-1000W_Alpha_NoLamp
SIZE
A1
DWG NO
0001
REV
FILE NAME: NXT_LP-1000W_Alpha_NoLamp_Bottom.dft
SCALE: WEIGHT: SHEET 1 OF 1
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
600
660
750
825
1000
1150
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Mike Ewer
DATE
09/21/16
Solid Edge
TITLE
SIZE
A1
DWG NO REV
FILE NAME: NXT LP top Alpha.dft
SCALE: WEIGHT: SHEET 1 OF 1
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
10.2. Placement and Replacement of the Reflector
Note: P.L. Light Systems recommends cleaning the reflector once a year (see
10.3) to maintain optimum performance. Depending on the environment and
contamination levels the reflector will degrade over time and will eventually
need to be replaced.
• Switch off main power source.
• The lamp doesn’t need to be removed to remove/replace the reflector.
• Support the reflector with hands on both sides (11).
• Lightly compress the sides of the reflector inwards, past the bracket tabs. (12).
• Lift gently (13).
• Remove the reflector.
• Position the new/clean reflector above the bracket.
• Lightly compress the sides of the reflector inwards, past the bracket tabs.
• Release the reflector
• Using both hands, adjust the reflector from the inside, by gently pressing out
-
wards until the outer rim fits securely beneath the collar tabs on all sides. (14)
• Switch on main power source.
Note:
Wear cotton gloves or wash hands thoroughly with soap & water to
remove any grime/oils before handling reflector.
fig(11)
f
f
f
f
fig(12)
fig(13)
m
m
m
m
fig(14)
f f
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Peter Stanley
DATE
08/04/16
Solid Edge
TITLE
NXT_LP-Alpha_Profile_Eye-Hook
SIZE
A1
DWG NO
0001
REV
FILE NAME: NXT LP side view eye bolt Alpha.dft
SCALE: WEIGHT: SHEET 1 OF 1
REVISION HISTORY
REV DESCRIPTION DATE APPROVED
DRAWN
CHECKED
ENG APPR
MGR APPR
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
ANGLES ±X.X°
2 PL ±X.XX 3 PL ±X.XXX
NAME
Mike Ewer
DATE
09/21/16
Solid Edge
TITLE
SIZE
A1
DWG NO REV
FILE NAME: NXT LP top Alpha.dft
SCALE: WEIGHT: SHEET 1 OF 1
REVISION HISTORY
REV DESCRIPTION DATE APPROVED