P.I.T. PHP160-C, Руководство пользователя

Страница: 17 / 30

16
HIGH PRESSURE WASHER
Repair • Contact an authorised service
centre.
• Contact an authorised service
centre.
• Remove and clean the filter.
• Bring the temperature under
50°.
Fault
Water is in the oil
Cause • O-rings (water and oil) are worn
out.
Repair • Contact an authorised service
centre.
Fault The machine does not suck
wax or detergent
Cause • Tanks empty.
• Rod knob on high pressure
position.
• Disconnected pipe in detergent
suction system.
Repair • Replace oil with double
frequency that is suggested.
• Fill the tanks.
• Turn it to the low pressure
position.
• Return it into position.
> REPAIRS - SPARE PARTS
For any problems not mentioned in this manual, or if
the machine breaks down, you are urged to contact
an Authorized After-Sales Service for the relative
repair or for any replacement of components with
original spare parts. Use exclusively original replace-
ment parts.
> WARRANTY CONDITIONS
All our machines are subjected to strict tests
and are covered against manufacturing de-
fects in accordance with applicable regula-
tions. The warranty is effective from the date
of purchase.
The following are not included in the war-
ranty: - Parts subject to normal wear. - Rub-
ber parts, charcoal, filters and the accessories
and optional accessories. - Accidental damage,
caused by transport, neglect or inadequate
treatment, incorrect or improper use and in-
stallation failing - The warranty shall not cover
any cleaning operations to which the operative
components may be subjected, such as clog-
ged nozzles and filter blocked due to limesto-
nes.
> DISPOSAL
As the owner of electrical or electronic
equipment, the law (in accordance with the EU
Directive 2012/19/EU on waste from electrical and
electronic equipment and the national laws of the
EU Member States that have implemented this Directive)
prohibits you from disposing of this product or its electri-
cal / electronic accessories as municipal solid waste and
obliges you to make use of the appropriate waste collec-
tion facilities.The product can be disposed of by returning
it to the distributor when a new product is purchased. The
new product must be equivalent to that being disposed
of. Disposing of the product in the environment can cause
great harm to the environment itself and human health.
The symbol in the figure indicates the urban waste con-
tainers and it is strictly prohibited to dispose of the
equipment in these containers. Non-compliance with the
regulations stipulated in the Directive 2012/19/EU and the
decrees implemented in the various EU Member States is
administratively punishable.