background image

ATEX UNLOADER AND RELIEF VALVES

SAFETY NOTE

SN03

Rev. 00

Date 27/10/2020

Pag. 8 of 10

Ambient risks

Ambient conditions different than those specified can cause a danger source.

They can cause dangerous service conditions (with relation to the processed fluids) an abrupt movement, humidity

effects, ambient temperatures and pressure changes, chemical agents, corrosion.

The working process in the installations must be carried out in such a manner to be not determined by a dangerous

influence.

Refrain from the functioning of the valve in case of evident irregularities. The rupture of some components provokes a

non-hydrokinetic function of the valve.

3.4.5 PPE (PERSONAL PROTECTIVE EQUIPMENT) & PROCEDURES TRAINING

The  choice  of PPE  (Personal  protective  equipment)  is  user’s  responsibility  according  to  the local  safety regulation,

predicting the following residuary risks:

Hot surface temperatures

Electrostatic charges

Infiammable liquids, noxious substances, etc

Others in relation to type of use

The use of the valve must foresee a precise training formation.

It is necessary to pertain to the application of the local safety regulation.

3.5 SYSTEM PROCEDURES

3.5.1 TOOLS & MACHINERY

The safety of the system is also in function with control devices (conform with Directive 2014/34/EU) which must be

absolutely independent from the valve.

3.5.2 LOAD & UNLOAD

Adequate means are foreseen for the draining and leakage in order to consent the cleaning operations, inspection and

maintenance in absolute safety conditions.

3.5.3 START & STOP

In case of doubt and an irregular function, stop the productive process, do not make brief repairs and ask qualified

personnel.

3.6 INSPECTION, ORDINARY & EXTRAORDINARY MAINTENANCE, SERVICE & CLEANING

3.6.1 PRECAUTIONS

Before  proceeding  to  the  periodic  procedures  of  inspection,  maintenance,  repairs  &  cleaning  it  is  necessary  to

discharge the internal pressure, through a duct converged in a safe area, to avoid damage to persons or things and

to verify the occurred discharge phase by means of control devices (pressure gauges).

Содержание 60.0590.00
















Отзывы: