Tips:
The remote control uses infrared, so the receiver module only receives the light wave
emitted by straight emission line. When the emission head or receiver module is
blocked or the light wave emitted by the emission head can’t be received, the remote
control will fail to function.
Low voltage of the batteries installed in the remote control will shorten the remote
control distance. Please replace the batteries in time.
When the remote control is out of service for a long time, remove the batteries to avoid
circuit damage.
Connecting to PC
Connect the device with the computer by USB cable.
In “My Computer”, find the removable disk and double click it to open it, to display the
files saved in the SD card. Such files can be copied, deleted, moved or the disk can be
formatted.
You can also choose to take out the micro SD card. Select a proper card reader to read
the data stored in the card.
After disconnecting the camera with the PC, the blue indicator will be on and the
camera will be in stand by status.
Reset
If the camera doesn’t work, use something thin and pointed and hold the reset button
for3 seconds to reset the device.
Light Indicator
Indicator
Status
Meaning
Recharging Indicator
Red
Charging
Recharging Indicator
Off
Battery is fully charged
Status Indicator
Green and then blue ON
Power on and Standby
Status Indicator
Blue and flash once
Taking photo
Status Indicator
Blue and then green
Recording video
Status Indicator
Flash quickly and then Off
Low power
