10. Instructions for Interface
When the device is connected to the TV, the following will appear
means the device is under recording mode
means the device us under photo mode (optional)
means the device is recording
Present time and date
Recording time and date
Motion detection
Note: After connecting the device to TV, if the picture is black and white, we suggest you
change the system to be “NTSC” or PAL”. Then, it should be colored.
11. Notes on Maintenance
A. This device is equipped with infrared remote controller. The reception may be affected or
operation does not work in the following cases:
Objects hindering the receiver or remote controller
The remote controller deviating from the receiver too much (the horizontal and vertical
reception angle of the receiver approx. 90 degrees)
The distance between the remote control and receiver is too far (within 8 meters
recommended)
Low battery of the remote control
B. If the remote control is not in use for a long time, the batteries should be taken out to avoid
eroding circuits.
C. When the device is working or it is started up, the micro SD card cannot be take out to avoid
damaging the card, device or files.
D. Please check the machine regularly. If any abnormal performance is detected, please check
the power or press “RESET” to reset the machine.
