5. Structure
6. Installation
Insert a micro SD card (up to 32GB)
Install the bracket and use screws to fix it on anywhere you need.
Connect the local power plug to the mini USB port of the device to charge the built-in
battery. The recharging indicator is red, once it is fully charged, the indicator turns off.
Insert the IR extension and fix up the IR extension on the suitable place for easily remote
controlling.
After the product is placed, its angle can be adjusted about 70 degrees forwards or
backwards. Try to record and check the picture angle by reading the micro SD. You can
also use the AV cable instead of IR extension to view the real time picture on TV.
7. Charging
Please charge the device when it is used for the first time or no battery power.
The charge time is equal to or longer than two hours (after complete discharge)
Because low battery may result in inability to start up or system halt, it is suggested
charge the device after using. When the battery is low, the device will shut down
automatically.
