For a single panel system – Corrugated Iron Roof
Attach the mounting straps onto the ends of the support angle.
Lay the angle on the roof in the selected position and attach the straps to the roof purlins.
Position the panel centrally on the angle and then attach a strap to the top edge of the panel and fasten it to
the roof.
For a two panel system – Corrugated Iron Roof
Select the most advantageous position for the panels on the roof.
Mark a point to represent the bottom left corner of the left hand panel at a position approx. 50mm below a
purlin.
Slide a mounting strap approx. 50mm onto left end of the angle and lay the support angle across the roof from
the marked point with a 15mm rise up to the right.
Adjust the strap along the angle so that it can be fastened down through the top of a sheet ridge into the pur-
lins.
Slide the angle through the mounting strap to leave 50mm projecting on the left of the mounting strap.
Slide a mounting strap 50mm onto right end of the angle, and, maintaining a 15mm rise along the angle, fasten
the mounting strap down through top of a sheet ridge into the purlin.
Locate the left hand panel into its selected position. Slide the second panel along the support angle from the
right until its compression fittings register with those on the first panel. Tighten the compression fittings. Make
any required adjustment to the panel’s position and then attach them to the support angle with the supplied
screws.
Fasten a mounting strap to the middle of top edge of each panel with the supplied screws and then fasten the
mounting strap down through the top of a sheet ridge into the purlin.
For a three panel system – Corrugated Iron Roof
Attach the additional support angle to the right hand end of the second panel and then slide a mounting strap
50mm onto the right hand end of the angle.
Fasten the mounting strap down through top of a sheet ridge into the purlin.
Install the third panel as per the second.
2. Tile Roof
Diagram of a Tile roof
14
15
Содержание OZS251E
