manualshive.com logo in svg

Ozito PXBSPS-180, Инструкция по эксплуатации, Страница: 7 / 8

Поделиться
Скачать
Ozito PXBSPS-180 Скачать руководство пользователя страница 7

Cleaning The Polishing Bonnet & Foam Application Pad

The included application pad and polishing bonnet can be re-used. For 

maximum life and performance, these should be cleaned after each use.

1.  Remove the bonnet and/or foam 

pad from the tool and hand wash 

under warm water.

2.  Allow the accessories to air dry before using it again.

Note: 

If needed, the bonnet can be machine washed in cold water with a 

small amount of detergent.

Cleaning The Tool

When not in use, the tool should be stored in a dry, frost free location, keep 

out of children’s reach.

If the housing of the tool requires cleaning, do not use solvents. Use of a 

cloth only is recommended. Never immerse any part of the tool into liquid.

Note: 

Ozito Industries will not be responsible for any damage or injuries 

caused by repair of the tool by an unauthorised person or by mishandling.

MAINTENANCE

DESCRIPTION OF SYMBOLS

Wear eye, ear & breathing 

protection

Wear hearing protection

Wear breathing protection

Wear eye protection

Warning

Wear gloves

Regulatory Compliance Mark

(RCM)

V

Volts

Ø

Diameter

n

0

/min

No load speed

Revolutions or reciprocations 

per minute

Read Instruction Manual

Power tools that are no longer usable should not be disposed 

of with household waste but in an environmentally friendly 

way. Please recycle where facilities exist. Check with your local 

council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw 

materials. Reuse of recycled material decreases pollution in the 

environment. Please recycle packaging where facilities exist. 

Check with your local council authority for recycling advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders 

Desk at your local Bunnings Warehouse. 
For further information, or any parts not listed here, 
visit www.ozito.com.au or contact Ozito Customer 
Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

WARNING! 

BEFORE CLEANING OR CARRYING OUT 

ANY MAINTENANCE PROCEDURE, ENSURE THAT 
THE BATTERIES HAVE BEEN REMOVED.

Содержание PXBSPS-180









Отзывы:

Нет отзывов