Attaching The Side Handle
The side handle should be used when working on contoured worksurfaces.
1. To attach the side handle, slide
the spacer onto the side handle
screw.
2. Screw the side handle into one of
the handle bolt holes on the tool.
Note:
Always hold the tool handle
and side handle with both hands
when the tool is in use.
3. To remove the handle, turn it anti-clockwise to unscrew it from the unit.
Attaching The D Handle
The D handle should be used when working on flat work surfaces.
1. Place the tool between the two
arms of the D handle, then slide
the handle forward into the slots
on each side of the tool.
2. Place a handle bolt into the hole
on the side of the D handle, and
use the hex key to tighten this
into place.
3. Repeat Step 2 with the second
bolt on the other side of the
handle.
4. To remove the D handle, undo the two bolts with the hex key and slide
the handle off the tool.
Attaching The Hook & Loop Accessory Disc
1. Press and hold down the spindle
lock buton.
2. Slide the accessory disc onto the
spindle and turn it anti-clockwise
to attach it.
3. To remove the accessory disc, press and hold down the spindle lock
button, then turn the accessory disc clockwise to unscrew it.
Installing Accessories To The Disc
1. Press the hook & loop backing of
the selected accessory against
the bottom of the accessory disc
to attach it.
2. FITTING THE SECONDARY HANDLES
3. ATTACHING ACCESSORIES
BRUSHLESS
BRUSHLESS
BRUSHLESS
BRUSHLESS
0
I
BRUSHLESS
0
I
05
BRUSHLESS
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING!
ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.