Ozito PWB-2800, Инструкция по эксплуатации

Страница: 5 / 10

5. STARTING 6. SPRAYING
1. Set the engine on/
off switch to the ON
position.
2. Set the fuel valve to
ON.
ON
ON
OFF
3. Set choke to CLOSE
position.
4. Set to full throttle.
HALF
THROTTLE
5. Pull the recoil starter
slowly until some
resistance is felt.
6. Then pull the recoil starter
firmly several times until the
engine starts.
7. Set choke to OPEN
position.
1. Ensure the throttle
lever is fully to the left
to achieve maximum
pressure.
4. When finished, set on/
off switch to OFF to
stop the pump.
ON
OFF
6. Release built up water
pressure by squeezing
the trigger.
7. The pump has a pressure relief
valve which will release a small
amount of water in the event of
overheating.
NOTE: DO NOT RUN FOR LONGER THAN 5 MINS
WITHOUT CIRCULATING WATER THROUGH THE
PUMP AS THIS COULD LEAD TO OVERHEATING AND
DAMAGE.
5. Set fuel valve to OFF.
OFF
WARNING: THE LANCE AND GUN WILL KICK BACK
WHEN THE TRIGGER IS FIRST PULLED.
1
PWB-2800
3. Squeeze trigger to
begin spraying.
2. Ensure trigger is not
locked off.
FULL
THROTTLE