8
ASSEMBLY
1.
Insert the rear leg of the stand into the
front frame using the nut and bolt supplied.
Tighten the bolt . The rear leg is also used
to move the mixer to other locations. (Fig. 1)
2.
Slide the wheels onto the front frame axle
and insert the cotter pin into the hole in the
axle to hold the wheels in place. (Fig. 2)
Check and maintain tyre pressure @
206kPa (30psi)
3.
Attach the drum rotation base to the motor
gear box assembly frame using the heavy
duty anchor pin. After you connect the
motor frame and rotation base with the
anchor pin insert the cotter pin to hold the
anchor pin in place. (Fig. 3)
4.
Slide the drum rotation base and motor
frame assembly onto the shaft of the
cement mixer frame. (Fig. 4)
5.
Mount the cement mixer drum onto the
gear box shaft. Turn the drum clockwise on
the gear box shaft thread until the shaft is
completely located in the drum. (Fig. 5)
Frame
Bolt & nut
Rear leg
Cotter pins
Frame
Wheel
Axle
Cotter pin
Anchor pin
Drum rotation base
Motor &
gear box frame
Motor frame &
rotation base
Shaft of
cement mixer
frame
Gear box shaft
Cement mixer
stand
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 2
Fig. 1