3. ADJUSTING THE TRIPOD
4. OPERATING THE LASER
OPERATION
Switching the Laser On and Off
Laser Operating Mode
1 Turn laser on or off by pressing
the on/off button at the top of
the unit.
The laser has 4 operating modes to assist in levelling as shown below.
Note:
The laser will always project a 360
°
line when projecting a
horizontal line.
1 To switch between these
modes, simply press the
on/off operating mode button
until the desired mode is
reached.
Note:
Laser can also be turned
on, in auto-levelling mode
by using the auto-levelling
switch.
a
b
a
b
Cross Line 360
°
Horizontal
Line
Vertical Line
Angled Line
WARNING!
ENSURE LASER WINDOW IS NOT AT EYE
LEVEL WHEN OPERATING.
Adjusting the Angle of the Laser
Adjusting the Tilt of the Laser
1 Rotate the angle
adjusting handle anti-
clockwise to allow the
handle to move.
2 Adjust unit to the desired
angle using the handle, then
secure in place by rotating the
handle clockwise.
1 Loosen the tilt locking knob by
rotating anti-clockwise. Then
adjust the tilt angle and secure
in place again.
Rotating the Laser
1 Loosen the rotation locking
knob by rotating anti-
clockwise. Adjust unit by using
the angle adjusting handle.
Note:
Secure in place after
adjusting, by turning the
rotation locking knob
clockwise.