background image

9

The battery (6) has been shipped in a low charge condition, and require charging prior
to use. 

Plug the charger adaptor (9) into a mains power outlet.

The green light on the adaptor (9) will illuminate
showing that power is being supplied to the 
adaptor (9). 

With the battery (6) sitting flat on a bench/table, align
the “+” and “-“ symbols on both the battery (6) and
charger connector (10), slide the charger connector (10)
into the recess of the battery (6) terminals ensuring a
firm connection (Fig. 1).

The charger connecter (10) only fits one way. If the charger connector (10) will not
fit it means it is  upside down.

When the battery (6) and charger adaptor (9) is properly connected, the light on the
charger adaptor (9) will illuminate red signifying that the battery (6) is on charge.

When fully charged, the light on the charger adaptor (9) will illuminate green. 

A battery (6) takes 2 hours to charge. Charging starts automatically. Remove the
battery (6) from the charging connector (10) after no more than 5 hours charging.

Initial charge

The battery (6) will not reach its full charge the first time it is charged. The red light
will remain illuminated until the charger adaptor (9) is disconnected from the
power source. 

Allow several charging cycles of charging and then discharging (through use of the
tool) for the battery (6) to reach its maximum charge. 

Caution: 

Remove the charger adaptor (9) from the mains power outlet when charger is

not in use. 

Note:

If the light on the charger adaptor (9) fails to come on:

- Check the charging adaptor (9) is securely plugged into the mains power outlet 

and switched on. 

- Check the charging connector (10) is securely connected into the socket of the 

battery (6).  

Subsequent charges 

After normal usage, approximately 2 hours of charging time is required to fully
recharge the battery (6). 

If the battery (6) is completely discharged, 5 hours or longer of charging time will
be required to fully recharge it. 

CHARGING YOUR LITHIUM ION BATTERY

Fig. 1

 

 

 

 

 

 

 

 

 

 

 

 

Содержание LBL-018

















Отзывы: