background image

7

WARNING!

Do not allow any liquid to get inside charger. Electric shock may

result. To facilitate cooling of the battery pack after use, avoid placing the

charger or battery pack in a warm environment such as in a metal shed, or an
uninsulated trailer. 

Before using the charger read all instructions and cautionary markings on the
charger, battery pack and the product using the battery pack.

Danger! 

If the battery pack case is cracked or damaged, do not insert it into

charger. There is a danger of electric shock or electrocution. 

This charger is not intended for any uses other than charging rechargeable
batteries. Any other use may result in risk of fire, electric shock or electrocution. 

Do not place any object on top of the charger or place the charger on a soft
surface that may result in excessive internal heat. Place the charger in a position
away from any heat source. 

To reduce risk of damage to the electric plug and cord, pull by the plug rather
than the cord when disconnecting the charger. 

Make sure the cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress. 

An extension cord should not be used unless absolutely necessary. Use of an
improper extension cord could result in the risk of fire, electric shock or electrocution.

Do not operate the charger if it has received a sharp blow, been dropped or
otherwise damaged in any way. Have it checked by an electrician or power 
tool repairer. 

Do not disassemble charger. Take it to an electrician or power tool repairer when
service or repair is required. Incorrect reassembly may result in a risk of electric
shock, electrocution or fire. 

To reduce risk of electric shock, unplug the charger from the outlet before
attempting any cleaning. Removing the battery pack will not reduce this risk. 

Never attempt to connect 2 chargers together. 

DO NOT store or use the tool and battery pack in locations where the temperature
may reach or exceed 40ºC (such as inside sheds or metal buildings in summer). 

The charger is designed to operate on standard household electrical power (240
volts). Do not attempt to use it on any other voltage! 

The battery pack is not fully charged out of the carton. First read the safety
instructions and then follow the charging notes and procedures. 

The longest life and best performance can be obtained if the battery pack is
charged when the air temperature is between 18 - 24ºC. Do not charge the battery
pack in an air temperature below 10ºC or above 40ºC. This is important and will
prevent damage to the battery pack. 

Do not incinerate the battery pack even if it is seriously damaged or is completely
worn out. The battery can explode in a fire. 

Never attempt to open the battery pack for any reason. If the plastic housing of
the battery pack breaks or cracks, immediately discontinue use and do not recharge.

LITHIUM ION BATTERY AND CHARGER SAFETY WARNINGS

!!

!!

!!

 

 

 

 

 

 

    

Содержание LBL-018

















Отзывы: