Ozito LBL-018, Инструкция по эксплуатации

Страница: 12 / 16

12
!!
OPERATION
Assembling the blower tube
Align the wide end of the blower tube (2) to the
opening of the blower housing.
The opening on the connecting side of the blower
tube (2) should be matched up with the blower tube
release button (3) on the blower housing. Join the
two by pushing them together. Ensure the blower
tube release button (3) clicks into position within the
hole in the blower tube (2) (See Fig. 4).
On/off switch
Hold the operation handle (5) and use your thumb to control the on/off switch (4).
To turn on the blower, push the on/off switch (4)
forwards. To turn off the blower pull the on/off
switch (4) backwards (See Fig. 5).
With continuous use the battery (6) and operator
handle (5) may become warm to touch.
This is normal and doesn't indicate a problem.
Note: Keep the vents of the air intake port (8) free
from leaves and debris.
DO NOT BLOCK AIR INTAKE PORT (8).
Blocking the air intake port (8) during operation will decrease the performance of
the tool and may lead to the product overheating and failing.
THIS IS NOT COVERED UNDER WARRANTY.
KEEP CLOTHING CLEAR OF AIR INTAKE PORT (8).
Using the blower
The blower is intended for DIY use only.
Use the blower outdoors to move debris such as leaves or grass clippings.
WARNING! The blower can throw debris, possibly causing serious
personal injury to the operator or bystanders.
• Do not blow hard objects such as nails, bolts, or rocks.
• Do not operate the blower near bystanders or pets.
• Use extra care when cleaning debris from stairs or other tight areas.
Wear safety goggles or other suitable eye protection, long pants, and shoes.
Fig. 4
Fig. 5