DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
Polishing
Wheel
4412620
Grinding
Wheel
4412625
Carbon Brush (Pair)
441256001021
Safety
Shield
441256001013
Safety Shield Bracket
441256001011
Adjustable
Tool
Rest-Left
441256001049
Adjustable
Tool
Rest-Right
441256001037
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
6. MAINTENANCE
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions or
reciprocation per minute
n
o
No load speed
Regulator compliance
mark
Wear gloves
Read instruction manual
Wear eye protection
Wear ear protection
Double insulated
Replacing the power cable
If the power cable for this equipment is damaged, it must be replaced
by the manufacturer or its after-sales service or similarly trained
personnel to avoid danger.
Cleaning
• Keep all safety devices, air vents and the motor housing free of
dirt and dust as far as possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low pressure.
• We recommend that you clean the device immediately each time
you have finished using it.
• Clean the equipment regularly with a moist cloth and some soft
soap. Do not use cleaning agents or solvents; these could attack
the plastic parts of the equipment. Ensure that no water can seep
into the device. The ingress of water into an electric tool increases
the risk of an electric shock.
Storage
Store the equipment and accessories out of children’s reach in a
dark and dry place at above freezing temperature. The ideal storage
temperature is between 5 and 30 °C. Store the electric tool in its
original packaging.
