The Bench Grinder is a combination tool for the grinding and polishing
of metals, plastics and other materials.
Securing the Grinder
Before operating the Bench Grinder,
it should be firmly secured to a
workbench, or a stable base.
Insert screws through the two
mounting holes at either side of the
base and use a screwdriver to fix the
grinder to the surface.
Fitting the Safety Shield
Brackets
NOTE:
All covers and safety devices
must be properly fitted correctly before
the equipment is switched on.
1. Safety shields must be fitted to each
wheel guard covers of the Bench
Grinder prior to operation.
2. Attach safety shields to the wheel
guard cover by inserting two adjusting
screws through the slots in the safety
shield bracket and the corresponding
holes in the safety hood.
3. Position the safety shield bracket so
that the distance between the grinding
wheel and the safety shield bracket
is as small as possible and does not
exceed 2 mm.
4. Hold the nut at the rear of the safety
shield bracket in place with a spanner,
while tightening the front adjusting
screws with a screwdriver.
NOTE:
Adjust the safety shield bracket
periodically to compensate for wear
on the grinding wheel.
Fitting the Safety Eye Shields
1. Position the safety eye shields
between the vertical braces at the top
of the safety shield brackets.
2. Insert a long screw
through a washer,
then through the
safety shield bracket
and safety eye shield
(screws and washers
supplied).
3. Place a washer on the end of the
screw and fasten the assembly in
place with a nut.
4. Hold the nut in place with a spanner,
while tightening the screw with a
screwdriver. Do not overtighten.
1. ASSEMBLY
SETUP & PREPARATION
IMPORTANT!
BEFORE ASSEMBLING YOUR BENCH
GRINDER, MAKE SURE THAT THE MOTOR IS OFF AND THE
TOOL DISCONNECTED FROM THE POWER SUPPLY TO
PREVENT ACCIDENTAL STARTING.
IMPORTANT!
THE EQUIPMENT AND PACKAGING MATERIAL
ARE NOT TOYS. DO NOT LET CHILDREN PLAY WITH
PLASTIC BAGS, FOILS OR SMALL PARTS. THERE IS A
DANGER OF SWALLOWING OR SUFFOCATING!
2 mm
Max.
