background image

GB

- 26 -

  Service  information

We have competent service partners in all countries named on the guarantee certi

fi

 cate whose contact 

details can also be found on the guarantee certi

fi

 cate. These partners will help you with all service re-

quests such as repairs, spare and wearing part orders or the purchase of consumables.

Please note that the following parts of this product are subject to normal or natural wear and that the 

following parts are therefore also required for use as consumables.

Category

Example

Wear parts*

V-belt, carbon brushes, table insert, push stick

Consumables*

Saw blade

Missing parts

* Not necessarily included in the scope of delivery!

In the e

 ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-

ase ensure that you provide a precise description of the problem and answer the following questions in 

all cases:

• 

Did the equipment work at all or was it defective from the beginning?

• 

Did you notice anything (symptom or defect) prior to the failure?

• 

What malfunction does the equipment have in your opinion (main symptom)?  

Describe this malfunction.

Anl_TSF_1211U_SPK7.indb   26

Anl_TSF_1211U_SPK7.indb   26

05.11.2019   14:37:51

05.11.2019   14:37:51

Содержание 43.405.42

































Отзывы: