OZGENC MAKINA OMRM-133, Руководство пользователя

Страница: 33 / 42

page. 32 / 42
32 TROUBLESHOOTING
8. TROUBLESHOOTING
8.1 ACTIONS TO BE TAKEN DURING FAILURE
1. Check the machine feeding voltage working with 3 phase of get it checked.
2. There should be 6 atmospheric pressured air. You can read this value over the regulator-
filter manometer of the machine.
3. Open the valve board cover of the machine. Check whether there is air leakage or not in air
hoses, air connection elements or valves. Try to correct it if there is an air leakage.
4. Close the main power switch on the machine and open the cover of the electrical board.
Check whether the two fuses in the board have blown or not. Correct if there is a break in
the cables on the contactors and if there is looseness in the connector screws.
8.2 FAILURE – REASON – SOLUTION TABLE
FAILURE REASON SOLUTION TABLE
There is no movement Electrical failure
Air connection failure Check the safety power switch.
Check the fuses.
Check the input phases.
Check the air connections.
Check the air pressure on the
conditioner.
Motors are not turning Electrical failure Check the safety power switch.
Check the fuses.
Right head motor is turning and
the left head motor is not
turning Thermic blown
Motor failure Check the thermic of the left
head.
Replace the motor with the
new one.
Left head is motor turning,
right head motor is not turning Thermic blown
Motor failure Check the thermic of the right
head.
Replace the motor with the
new one.
Clamping cylinders do not
clamp Valve or cylinder failure
See page 26 VALVE AND
CYLINDER CONTROL