OZGENC MAKINA OMRM-133, Руководство пользователя, Страница: 34 / 42

page. 33 / 42
33 TROUBLESHOOTING
Button contact failure
Right head platform is not fixed
Check the button contact
Turn ON the fixation. See page
13 Switch “Fixation”
Right and the left head don’t
tilt to 45▫ degree Valve and piston failure
Mechanical pressure valve is
closed See page 26 VALVE AND
CYLINDER CONTROL
See page 23 INTERMEDIATE
DEGREE SETTING
The system is leaking air Air connection, joint places and
union failure Check the connection and joint
places
Emergency stop buttons not
working Button contact failure Check the contact
Right saw is not moving
forward Valve and piston failure
Control device has not reached
the position See page 26 VALVE AND
CYLINDER CONTROL
Check the positioning device
indicators
Left saw is not moving forward Valve and piston failure
Control device has not reached
the position See page 26 VALVE AND
CYLINDER CONTROL
Check the positioning device
indicators
Positioning measures do not
match Calibration inaccurate See page 12 MEASURE
CALIBRATION
Position control device is not
working Position control device or
position control fuse failure Check the fuse first then the
device
Going forward in vibration or
going backward in vibration Speed union settings
unadjusted
Insufficient lubrication in
pneumatic cylinder See page 27 CYLINDER SPEED
ADJUSTMENT
See page 30 FILTER-
REGULATOR
Saws do not come out or go
back simultaneously Valve or cylinder
Speed union settings
unadjusted See page 26 VALVE AND
CYLINDER CONTROL
See page 27 CYLINDER SPEED
ADJUSTMENT
The sawdust going out the saw
is yellow and there is an odor
like the pvc burnt. Saws are blunt or the teeth are
broken
Saw proceeding is fast Sharpen the saw or replace
with the new one.
See page 25 CHANGING THE
BLADE
See page 27 CYLINDER SPEED
ADJUSTMENT