OzCharge OC-SW121040, Руководство пользователя

Страница: 6 / 8

-
6-
TROUBLE SHOOTING
Problems Indication Possible causes Suggest solution
Charger does
not work Indicator lights are not
on - No AC power - Check AC connections and make
sure Power Point is switched ON
Charger has
no DC output
Fault LED is Flashing. - Output is short circuited
- Output cables are not connected to the
battery.
- Output Reverse polarity connection
- Check DC connection between charger
and battery and make sure they are not
short circuiting.
- Check that the crocodile clips haven’t
fallen off the battery.
- Check that the crocodile clips / ring
terminals are connected to the correct
polarity.
No Charging
Current
Fault LED is ON - Battery is severely sulphated
- Battery has a damaged cell
- Charger overhead protection mode - Check the Battery condition, age etc.
- If battery cannot be rejuvenated it must
be replaced.
- Move battery & Charger to cooler
environment
Long charging
time, Full light
does not come
on
Fault LED is ON - Wrong battery type selected
- Battery capacity too large
- Battery is defective
- 6 hours soft start timer reached
- 24 hours bulk charge timer reached - Check the charging rate and battery type
selection matches the battery.
- Battery cannot be charged and must
be replaced.
Abnormal LED
indication ALL LED’s Flash - Poor connection from Charger to
Battery - Check for a loose battery terminal
connection.
- Check the output wires crocodile clips
for loose / damaged connection.
2 YEAR MANUFACTURER WARRANTY
Zylux Distribution Pty. Ltd. (OzCharge) warrants to the Customer that this product is substantially free from defects in materials and
workmanship under normal use for a period of 2 Years from the Date of Purchase.
Please ensure you keep a copy of your receipt on file as this will be required for proof of purchase and to validate your warranty.
Obtaining Warranty Service
Within the warranty period, the Customer must contact the authorised supplier / retailer where the product was purchased or alternatively
you can contact the OzCharge service centre through one of the following methods:
Hotline
: (03) 9482 2203
Website
: www.ozcharge.com.au
If the Authorised Supplier and / or OzCharge service centre concludes that while under normal use, a product failure or malfunction occurred
during the warranty period and was caused by a defect in material or workmanship (see Exclusions), the Customer will be asked to ship to
the nearest service point. The product must be packaged appropriately for safe shipment. To prove that the product is under warranty, the
customer should enclose a copy of their receipt for proof of purchase. It is recommended that returned products be sent by registered mail as
Zylux Distribution Pty Ptd. (OzCharge) accepts no responsibility / liability for goods lost or damaged in transit. Return Shipping costs to be
incurred by the Customer.
Exclusions
If upon receiving a product for repair and if testing and examining the product has disclosed that the alleged defect or malfunction in the
product does not exist or was caused by the Customer or any third persons misuse, physical abuse, water damage, unauthorised attempts
to open, repair or modify the product or improper installation, this will not be covered under this warranty.
This Warranty is void if:
1. The product has been tampered or repaired by unauthorised personnel.
2. The warranty seal is broken or altered.
3. The warranty period has expired.
OPTIONAL ACCESSORIES
Model: OC-SW121040 (1/2/4Amp) / OC-SW121060 (2/4/6Amp)
– Ring Terminal Connector (Model No. OC-RT-4/6A)