OzCharge OC-SW121040, Руководство пользователя

Страница: 5 / 8

-
5-
Automatic Equalisation Process (For Calcium Batteries Only)
NOTE:
We recommend to disconnect the Battery from the Vehicle before using this feature.
Your OzCharge Battery Charger also provides a battery equalisation function.
What does this feature do?? –
Equalisation helps to maintain and balance your battery cells by reversing the
high concentration of electrolytes from the bottom of your battery.
This allows all the cells to charge evenly and makes you get the most out of your battery.
You can you this feature weekly to ensure your battery is always well maintained.
Note:
If you select the Calcium battery type, the charger will automatically run the equalisation stage during the
charging cycle.
The Equalisation process does not occur for GEL, Sealed/WET Battery Type Selection.
Depending on the charge rate selected, this process will time out after 1 to 3 hours.
Equalising voltage is set to 16.2V for Calcium batteries.
4. Disconnecting the Battery charger from Battery.
(a) If the Battery is out of the vehicle.
1. Switch OFF and Remove the AC Power Socket from the outlet.
2. Remove the Black lead and then the Red lead.
3. Check electrolyte levels if possible. (As they may need topping up with distilled water after charging)
(b) If the Battery is in the vehicle.
1. Switch OFF and Remove the AC Power Socket from the outlet.
2. Remove the lead from the vehicle chassis.
3. Remove the lead from the battery.
4. Check electrolyte levels if possible. (As they may need topping up with distilled water after charging)
CHARGING STAGES
Note:
The Charger automatically stops charging after 24 hours if the Bulk charge cycle is not completed.
Also, if the Battery type selected is Calcium, there is an additional equalising stage after the Absorption
stage.
CHARGER SPECIFICATIONS
1. Input: 220~260Vac; 50Hz;
2. Rated output: 13.5V at 1/2/4A selectable on OC-SW121040,
13.5V at 2/4/6A selectable on OC-SW121060,
3. Type of Lead-acid Battery: Gel/AGM&WET/Calcium
4. Charging output voltage (Absorption): 14.1/14.4/14.7V at Gel/Sealed, WET/Calcium
5. Charging output voltage (Automatic Equalisation): 16.2V only for Calcium battery
6. Float output voltage: 13.8V at Gel/Sealed, WET/Calcium
7. Operating Environmental: 0~40 degC, 90% RH maximum; non-Condensing
8. Net Weight: 630g approx (OC-SW121040 & OC-SW121060)
9. Dimension: L164 x W85 x H65mm (OC-SW121040 & OC-SW121060)