LED/SWITCH OPERATION & INDICATOR TABLE:
When your vehicle fails to start due to a flat battery,
simply press the emergency start activation switch.
The LED on the remote switch and the main unit will
illuminate GREEN. When the LED is GREEN, start your
vehicle.
Please ensure your radio, heater, air conditioner, head-
lights are switched off before starting.
The LED will automatically turn off within 30
seconds and the device will automatically recharge
if required.
Note:
If you’re battery voltage is below 10.5V in the
vehicle, the LED indicator will flash Red to inform
you that your battery is flat.
LED
Status
Description
Green
ON
The LED will illuminate GREEN when the Emergency Start Switch is activated.
It will remain Green for 30 seconds or unless you press the Emergency Start
Switch again to deactivate the units output.
Red
Flash
The LED will flash RED when the vehicles battery voltage is under 10.5V.
TROUBLE SHOOTING:
Problem
Indication
Possible Causes
Suggested Solution
Vehicle will not start
The Green LED
is ON
- Too many
accessories are on.
- Unit Capacity
not sufficient for
application.
- Please ensure your radio, heater, air
conditioner, headlights are switched
off before starting.
- Check product is suitable for your
application.
Emergency Start will
not activate
LED is OFF
- The vehicles battery
voltage is below 0.5V.
- Battery is completely dead flat. The
vehicles battery needs to be over
0.5V for the Emergency Start feature
to activate. Check and make sure all
Accessories, lights, loads are switched
off and try pressing the Emergency
Start switch again.
- Vehicle battery most likely needs
replacing. Consult a battery specialist
for testing.
FUSE
4 • OzCharge manual
www.ozcharge.com.au
